This driveway is paved with Brindle Formpave in a herringbone pattern with Aco drainage fitted to the front of the drive. The step to the front door is paved with Brindle blocks and a Charcoal edge.
Block Paved Driveway
We have undertaken many different kinds of projects over the years, here are a few of them with details of the materials used.
This elegant curved boundary wall was made using Rudgewick Multis bricks with a half soldier course on the top of the wall.
Curved Brick Wall
In this project we repaired the left-hand side of the Bargate stone wall as well as paving the patio. We have used Rudgewick Paviors in a brickwork pattern for the patio and steps with a rope top edging. Materials for this project were sourced from Manya Building Supplies in Slyfield Green.
Patio with Edging and Stone Wall
These attractive steps are an interesting mix of materials. We have used slate for the top of the steps coupled with Rudgewick brick risers. The wall to the side of the steps was also built using the Rudgewick bricks to match the risers.
Double Block Paved Pathway
Brick and Slate Steps with Brick Wall
This unusual path is beautifully split into two with pretty sweeping curves. The path is block paved with a herringbone pattern and stright horizontal edging in Autumn Sunset Formpave with rope edgings on main path section.
This boundary fence is made using Closeboard fence panels with concrete gravel boards and posts. These materials were all sourced locally from Ashvale Sawmills, Shalford. The driveway is block paved in Brindle in a herringbone pattern with a straight vertical Charcoal edge.